Log In

General Info


EDMO #: 730TBB
MFR #: 730TBB

The Greenlee Round Hole Punches make instrument hole cutting for 1", 2-1/4" and 3-1/8" holes quick and easy. Here's how it works:

  • (1) Layout hole location, draw centerlines so that they extend beyond the hole size to be punched.
  • (2) Drill proper size pilot hole in the center.
  • (3) Put drive screw through die and pilot hole.
  • (4) Thread on punch until both die and punch are ight against metal.
  • (5) Line up center lines of the hole with marks on outside of the die.
  • (6) Turn drive screw with open end or box wrench (clockwise) until hole is punched.
  • (7) Remove punch from drive screw and the metal halves will fall out.
  • NOTE: You can use the Hydraulic Ram Kit (P/N:7646) with the round hole punches instead of turning the drive screw with a wrench.

View Related Parts from EDMO DISTRIBUTORS, INC
Log In for Pricing
Recommend this item to a friend
© 2005 – EDMO
12830 E. Mirabeau Parkway
Spokane Valley, WA 99216