Amplified GPS Splitter | 1 Input, 4 Output, N-type Female

Product Description

These amplified GPS splitters feature one input and four outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 – J4, are DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.
 

This amplified GPS splitter (EDMO# ALDCBS1X4) features one input and four outputs, N-type female connectors.

Specifications

• Weight:
  11.7 oz max.
• Dimensions:
  1.3 x 3.25 x 2.5 in (without connections)
• Operation Temperature:
  -57°C to 87°C
• Frequency Response:
  1.1 GHz – 1.7 GHz (covering major GNSS constellations)
• Characteristics Impedance:
  50Ω (unused ports should be terminated with 50Ω loads)
• Current Draw:
  17 mA, typical
• Input P1dB:
  -24 dBm (the 1dB compression point)
• Req. DC Input V.:
  3.3 VDC — 15 VDC (operating voltage range for non-networked units)
• Gain:
  17 dB — 20 dB (18.5 dB, typical)
• Input SWR:
  2.0:1 (Input Standing Wave Ratio: S11)
• Output SWR:
  2.0:1 (Output Standing Wave Ratio: S22)
• Noise Figure:
  L1: 2.5 dB, typical (2.75 dB max.)L 2: 5.5 dB, typical (6.00 dB max.)
• Gain Flatness:
  0.5 dB typical (1.0 dB max.)
• Amplitude Balance:
  0.5 dB typical (1.0 dB max.)
• Phase Balance:
  4.0° max.
• Isolation:
  L1: 24 dB, min. L2: 22 dB, min.
• Group Delay Flatness:
  0.25 ns, typical (1.0 ns, max.)
• Connector Option:
  N-type female

Product Codes

• Mfr Part No
  ALDCBS1X4-N
• ECCN
  7B994
• SCHEDULE B CODE
  9014.80.6000