EMI Shielded Passive GPS Antenna Splitter | 1 Input, 2 Output, TNC Connector
GPS NETWORKING
EDMO#: ELDCBS1X2T
MFR#: ELDCBS1X2-T
Description
These passive GPS splitters feature one input and two outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to passively split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2, is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevents alarm faults.
This passive GPS antenna splitter (EDMO# ELDCBS1X2T) features one input and two outputs, TNC connectors; it also features EMI shielding.
Features
- Precise amplified balance: < 1 dB variation between ports
- Flat group delay: < 1 ns variation between L1 & L2
- Low insertion loss: -4.0 dB typical
- Wide accepted frequency range: entire L-band & major GNSS constellations
- Efficiently blocked ports: 200Ω resistor prevents alarm faults
- Match phase balance: < 2° variation between ports
Specifications
Weight:
10.2 oz (289 g)
Dimensions:
1.3 x 3.25 x 2.5 in, max. (not including connectors)
Operating Temperature:
-57°C to 87°C
Frequency:
1.1 GHz — 1.7 GHz
Characteristic Impedance:
50Ω
Input SWR:
2.0:1, max.
Output SWR:
2.0:1, max.
Insertion Loss:
-3.0 dB to -5.0 dB (-4.0 dB, typical)
Gain Flatness:
0.25 dB, typical (1.0 dB, max.)
Amplitude Balance:
0.1 dB, typical (1.0 dB, max.)
Phase Balance:
1.0°, typical (2.0°, max.)
Isolation:
L1: 22 dB, min.
L2: 15 dB, min.
Group Delay Flatness:
0.1 ns, typical (1.0 ns, max.)
Connect Option:
TNC connector
Product Codes
Mfr Part No :
ELDCBS1X2-T
Notice: EDMO Distributors, Inc. has made every effort to verify the accuracy of the codes, classifications, and part approvals listed in accordance with the Department of Commerce, U.S. Census Bureau, Bureau of Industry and Security, U.S. Department of Defense and Federal Aviation Administration. EDMO Distributors, Inc. does not assume responsibility for errors or omissions. This listing is subject to change without notice.
Warning to Exporters: EDMO Distributors, Inc. does not assume responsibility for errors with any of the Schedule B Commodity Codes or Export Control Classification Numbers in this listing. It is the Exporter's responsibility to research and supply the correct codes and classifications for the product to be exported. Some products may require an Export License in order to be exported.