Hi-Isolation Networked Amplified GPS Splitter | 1 input, 2 output, TNC Connectors

Product Description

This Hi-Isolation amplified network loaded DC blocked GPS splitter features one input and two outputs for spitting RF frequencies from 1.1 GHz — 1.7 GHz. It is designed to amplify and split the L-band frequency to multiple devices from a single antenna. In the standard configuration, the J1 port passes DC voltage from a connected device to the antenna or another device up from the splitter. The other port J2 is DC blocked and loaded with a 200Ω resistor to simulate antenna current draw which prevent alarm faults.

This Hi-Isolations amplified GPS splitter (EDMO# NHIALDCBS1) features one input and two outputs, TNC-type female connectors, 5-volt output voltage, and 9-32 VDC [customer supplied] source voltage with MIL DC Connector (Includes Mate).

Specifications

• Weight:
  10.2 oz (289 g) max.
• Dimensions:
  1.3 x 3.25 x 2.5 in (not including connectors)
• Operating Temperature:
  -57°C to 87°C
• Frequency Range:
  1.1 GHz — 1.7 GHz
• Characteristic impedance:
  50Ω
• Req. DC Input V.:
  3.3 VDC — 15 VDC
• Input P1dB:
  -24 dBm
• Current Draw:
  24 mA
• Gain:
  21 dB — 23.5 dB (22 dB, typical)
• Input SWR:
  2.0:1
• Output SWR:
  2.0:1
• Noise Figure:
  L1: 2.3 dB, typical (2.5 dB, max.) L2: 4.7 dB, typical (5.0 dB, max.)
• Gain Flatness:
  0.5 dB, typical (1 db, max.)
• Amplitude Balance:
  0.25 dB, typical (1 dB, max.)
• Phase Balance:
  4.0°, max.
• Isolation:
  L1: 22 dB L2: 15 dB
• Group Delay Flatness:
  0.5 ns, typical (1 ns, max.)
• Source Voltage Option:
  9VDC — 32 VDC (customer supplied) MIL-DTL-5015 10SL DC Connector (Includes Mate)
• Output Voltage:
  5V @ 130 mA
• Connector Option:
  TNC type

Product Codes

• Mfr Part No
  NHIALDCBS1X2-T/5/MC