1291BL Single-Axis Position & Rate Table System | 24in Tabletop, SR64 option, Controller

Product Description

The Model 1291BL single axis position and rate table system is design to provide precise position, rate and accretion motion for development or production testing of commercial or  military inertial sensors. The 1291BL is specially designed for testing smaller inertial sensors and systems.

The accuracy and reliability of the 1291BL test table is achieved with a servo controlled system that consists of a direct drive brushless torque motor, a precision absolute optical  encoder, and an internal microprocessor-based motion control card. A standard RS-232 interface provides remote control from a PC computer for position, rate, and acceleration profiles. 

This 1291BL Singe-Axis table (EDMO# 231150-23) includes the 24-inch tabletop and the slip ring upgrades (-SR64) for up to 64 lines (10 lines at 5A per line, 54 lines at 3A per line) and includes the controller assemble (Controller Assembly, EDMO# 231150-905).

Specifications

• Weight:
  50 lb (23 kg)
• Dimensions:
  19 x 18.6 x 7 in (483 x 472 x 178 mm)
• Test Load Capacity:
  Height: 11 in (279 mm) Weight: vertical axis configurations: 125 lb (56 kg) centered; horizontal axis configuration axis configuration: 50 lb (33 kg) centered; optional: heavy duty 200 lb (92 kg)
• Slip Ring Lines (-SR64 upgrade):
  64 lines (26 twisted shielded pair at 3A per line, 2 singles at 3A per line, 10 singles at 5A per line)
• Electrical Connectors:
  Tabletop: (2) 37 pin Female D-sub connectors Base: (2) 37 pin Male D-sub connectors
• Controller (user supplied PC with RS-232 or IEEE-488):
  Type: internal Communication Interface: RS-232 standard (max 115,200 baud) Analog input: Rate or Position. Two ±10V 16 Bit Inputs, scalable Analog output: Position, Velocity, Rate or Position Error ±10V = full scale, scalable, 16 bit resolution. Update Rate is 1 KHz Software Control: Uses simple software command set (ATL) via host PC
• Temperature:
  50°F to 98°F (10°C to 35°C), operating -20°C to 120°F (-29°C to 40°C), non-operating
• Relative Humidity:
  20% to 85%, non-condensing
• Power Requirements:
  IEC 60320 Power Entry Connection 115/230VAC ± 10%, 1Ø, 50/60 Hz, 5A(FLA), 10A BREAKER, 5kA SCCR (230VAC Required for speeds over 2000 deg/sec)

Product Codes

• Mfr Part No
  231150-23
• SCHEDULE B CODE
  9031.80.8080

Documentation

• model1291bl_rev.pdf