Fluke T5-600 Voltage, Continuity and Current Tester

Product Description

The Fluke T5-600 Voltage, Continuity and Current Tester is a versatile troubleshooting tool to carry to every job site. Use it to check voltage, continuity, and current with one compact tool. Just select volts, ohms, or current and the tester does the rest.

Specifications

• Weight:
  300 g
• Dimensions:
  30.5 x 51 x 203 mm
• Battery life:
  200 hour zinc chloride, 400 hour alkaline
• Battery type:
  2 x AA
• Low battery indicator:
  Yes
• Current sensor opening:
  12.9 mm
• Jaw opening:
  12.9 mm (0.5 in)
• Max wire size:
  1/0 THHN Cable
• Current range AC rms:
  0 to 100.0 A
• Accuracy AC current (50/60 Hz):
  3% ± 3 counts
• AC response:
  Averaging
• Voltage range AC/DC:
  0 to 600 V
• Voltage accuracy:
  AC: 1.5% ± 2 counts DC: 1% ± 1 count
• Resistance range:
  0 to 1000 Ω
• Continuity beeper threshold:
  On at 400 Ω
• Volts indicator LED threshold:
  Guaranteed on by 30 V AC
• Operating temperature:
  -10°C to 50°C
• Storage temperature:
  -30°C to 60°C
• Humidity (without condensation):
  0% to 95% (5°C to 30°C); 0% to 75% (30°C to 40°C); 0% to 45% (40°C to 50°C)
• Dust/water resistance:
  Yes
• Operating altitude:
  2000 meters max
• Temperature coefficient:
  0.1 x (specified accuracy)/°C ( 28°C)
• Measurement Category:
  IEC 61010-2-032, IEC61010-2-033: CAT III 600 V, 100 A ac
• Agency approvals:
  CSA, TUV
• Maximum voltage:
  600 V (between any terminal and earth ground)
• Warranty
  : Two-years

Product Codes

• Mfr Part No
  648227
• ECCN
  EAR99
• SCHEDULE B CODE
  0000.00.0000

Documentation

• FLUKE T5-600 Data Sheet